TrailRax Modular Half Rack For The Ford Bronco
TrailRax Modular Half Rack For The Ford Bronco
TrailRax Modular Half Rack For The Ford Bronco
TrailRax Modular Half Rack For The Ford Bronco
TrailRax Modular Half Rack For The Ford Bronco
TrailRax Modular Half Rack For The Ford Bronco
TrailRax Modular Half Rack For The Ford Bronco
TrailRax Modular Half Rack For The Ford Bronco
TrailRax Modular Half Rack For The Ford Bronco
TrailRax Modular Half Rack For The Ford Bronco
TrailRax Modular Half Rack For The Ford Bronco
TrailRax Modular Half Rack For The Ford Bronco
TrailRax Modular Half Rack For The Ford Bronco

TrailRax Modular Half Rack For The Ford Bronco

TR-FB-2DR-MRR-HR


  • In stock, ready to ship
  • Inventory on the way
Rack Style
Pak Rax?
Sale price$849.99
/
Shipping calculated at checkout.
4 Door Half Racks ship end of March

Specs:

  • Overall height added to your Bronco- 3.845" from the center of the hardtop or 3.345" from the highest point of the hardtop (outer edges).
  • Static load rating for half-rack: 300 lbs evenly distributed across the rack
  • Dynamic load rating for half-rack: 150 lbs evenly distributed across the rack
  • These ratings are rated and measured WITH optioned Pak Rax. The Pak Rax allows for the distribution of weight to the body of the Bronco allowing the best stability and carrying load capacity.

Attributes of the TrailRax Modular Roof Rack for the Ford Bronco:

  • Higher weight capacity than the OEM roof rack and others
  • Easy bolt-on install
  • Wind deflector to minimize annoying wind noise issues
  • All 3/16 Aluminum construction to avoid any rust
  • Low profile to fit in garages and more
  • Offer the ability to remove the front and middle MIC hardtop panels
  • Half-rack will mount to the rearmost portion of the MIC hardtop and will not exceed past the middle panel

    TrailRax, Inc. Warranty Policy 

     

    TrailRax offers a lifetime limited warranty on all TrailRax products. Warranty is limited to product failure under normal operating conditions. Our lifetime limited warranty covers defects in materials used to manufacture our products,  defects in workmanship, and broken components deemed to have failed under proper installation and normal wear and tear. Due to the nature in which our products are used, TrailRax cannot be  responsible for any chips, scratches, rust or flaking to the finish. Additionally, TrailRax cannot be held financially responsible for any labor associated with installation or removal of our products. The placing of an order constitutes your understanding and acceptance of our Warranty policy.

    This warranty does not cover defects caused by normal wear and tear, scratches, accidents, or products used for racing/competition. This warranty does not cover damage to the finish of powder-coated products. TrailRax, Inc. is not responsible for defects that are not in control of TrailRax, Inc. such as trail damage, overloading, incorrect assembly, or poor maintenance practices. TrailRax, Inc. is not responsible for defects or damage to products manufactured by other vendors and sold through TrailRax, Inc.

    This  warranty only applies to the original retail purchaser and the original installation of the  product. This warranty is NON-TRANSFERRABLE.  No retailer, reseller, dealer, or agent is authorized to make modifications, extensions,  amendments, or additions to this warranty.

    If you discover a defect, TrailRax will, at its option, repair or replace this product with a new or reconditioned product at no charge to you, provided you return it during the warranty period, with transportation charges prepaid, to TrailRax. (You can obtain additional information by contacting TrailRax at the address printed below). Prior to returning the product, you must obtain from TrailRax a Return Merchandise Authorization Number (RMA#) by contacting TrailRax at the address or phone number below. You are responsible for properly packaging the product to be returned. Please attach your name, address, telephone number, and a copy of the RMA form with ticket number, as well as a detailed description of the problem for which service is requested. If the repairs are covered by this warranty and if the product was properly shipped to TrailRax, TrailRax will pay the return shipping charges (domestic addresses only). This warranty applies only to TrailRax products manufactured by TrailRax that can be identified by TrailRax product trademarks, trade names, or logos affixed to them.

    The original purchaser is responsible for shipping expenses to return the product to TrailRax. 

    385-777-2601

    1654 W 1250 S, Unit 2

    Woods Cross, Utah 84087

    TRAILRAX HAS THE RIGHT TO REFUSE/VOID A WARRANTY IF THE PRODUCT  FALLS UNDER ANY OF THE VOID ACTIONS AS STATED BELOW; AND WILL NOT  BE ELIGIBLE FOR EXCHANGE, REFUND OR WARRANTY CONSIDERATION. 

    ACTIONS THAT WILL VOID YOUR WARRANTY 

    • IF PRODUCT WAS NOT PURCHASED DIRECTLY FROM TRAILRAX OR  AUTHORIZED TRAILRAX RETAILER OR DISTRIBUTOR. 
    • PROOF OF PURCHASE CANNOT BE PROVIDED. 
    • INSTALLATION OF THE PRODUCT ON THE WRONG VEHICLE OR MODEL. 
    • IF DETERMINED THAT PRODUCT OR INSTALLATION WAS MODIFIED,  CHANGED, ALTERED OR CUSTOMIZED IN ANY WAY. 
    • REINSTALLATION OF PRODUCT ON ALTERNATE VEHICLE.
    • INSTALLATION OF THE PRODUCT WAS IMPROPER. FOR EXAMPLE, CROSS THREADING HARDWARE.
    • USER NEGLIGENCE AND CARELESSNESS IS OBSERVED


    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Our 90 degree bend

    We added a bend into our 5052 Aluminum side panels to drastically increase durability and strength. This helps us achieve the highest rated rack for its low profile. This bend also offers full 360 degree mounting area on the rack, you are now not limited to where your TSLOTS are mounted.

    For the weekend warrior

    The Modular Half Rack offers an open front end that allows you to still experience an open air experience with your removable panels while still allowing to carry your stuff in the back.

    Our Integrated Pak Rax option

    Our Pak Rax option is a patented specialty of ours that we designed to be an additional storage solution. In this case with the Bronco, It actually allows for a higher load capacity than factory ratings. The Pak Rax adds more stability and weight load because it distributes weight to the body of the Bronco putting less stress on the MIC Hardtop.


    The long-awaited Ford bronco Roof Rack that works with the TrailRax Pak Rax! This Aluminum roof rack offers an assortment of ways to mount gear and tools for your next adventure. We use 5051 3/16" aluminum for the main panels that give extreme rigidness and durability for all the gear you plan to equip your Bronco with. We also have a large number of accessories available with this roof rack that will allow endless combinations and possibilities for the end-user. 

    Our Aluminum extrusions that come with the rack are anodized black and cut to length with the most precision possible. The extrusions are made locally here in Utah and have a high-stress rating as well as deflection rating giving the user the best load capacity possible.

    Our one-piece side panels for the roof rack offer extreme durability and capacity to the rack itself. It also offers a 90-degree bent channel that gives the end-user an area to mount even more accessories. These panels also come precut with slots to add more extrusions and tools to the side panels, offering more modularity and customization.

    The mounting system uses a clamping system that clamps onto the OEM Ford MIC hardtop that offers an easy bolt-on design. The front of the full-length roof racks mounts into existing studs on the windshield offering a very rigid place to distribute loads on the roof rack. Our Pak Rax for the Ford Bronco mounts directly into the side panel and offers some weight distribution from the rack down to the body of the car which puts less stress on the MIC Hardtop allowing for higher capacity.

    Our TrailRax Modular Roof Rack line is a great option for the all-out overlanders or desert racers as well as the entry-level overlanders or off-roaders. This rack gives the end-user the ability to upgrade or add to their roof rack as they need.

    MIC Hardtop is required for the product. 

    Specs:

    • Overall height added to your Bronco- 3.845" from the center of the hardtop or 3.345" from the highest point of the hardtop (outer edges).
    • Static load rating for half-rack: 300 lbs evenly distributed across the rack
    • Dynamic load rating for half-rack: 150 lbs evenly distributed across the rack
    • These ratings are rated and measured WITH optioned Pak Rax. The Pak Rax allows for the distribution of weight to the body of the Bronco allowing the best stability and carrying load capacity.

    Attributes of the TrailRax Modular Roof Rack for the Ford Bronco:

    • Higher weight capacity than the OEM roof rack and others
    • Easy bolt-on install
    • Wind deflector to minimize annoying wind noise issues
    • Majority Aluminum construction to avoid any rust
    • Low profile to fit in garages and more
    • Offer the ability to remove the front and middle MIC hardtop panels
    • Half-rack will mount to the rearmost portion of the MIC hardtop and will not exceed past the middle panel

    Brand's and Products recommend using with our TRMR Rack:

    While you are not limited to these brands, these brands worked with us along the way in designing the rack. This gives us and them the ability to work with their products within the design to make sure everything fits properly and works together in harmony. If you are looking to accessorize your TRMR Rack, look no further than these brands if you want high-quality products that fit directly to your TRMR Rack with no headaches. 

    Hit this link!

    Ford rates the Bronco roof with a factory rack at "Max load 110 lbs dynamic and 450 lbs static evenly distributed." All these weights will be at your discretion as they are above Ford's "recommended" capacities. We build our rack to be capable on its own of withstanding 300 lbs static, and 150 lbs dynamic. GVWR and other factors such as roof materials, the center of gravity, and wind dynamics all apply to any load you put on top of a vehicle, and you, as the user, are responsible for the safe loading and operation of your vehicle. Please review your Owner's Manual to review your recommended payloads for your Bronco. If you need more information please contact us at info@TrailRax.com.